Services - Ufudu Zambia

PREFAB BUILDINGS

AFFORDABLE, EFFICIENT PREFAB BUILDINGS FOR SALE OR HIRE

Ufudu provides a comprehensive range of affordable, efficient and low-maintenanceÂ prefab buildings for sale or hire, to meet yourÂ home, office or storage requirement.Whatever your particular home, office or other space needs in Southern Africa, and irrespective of the applicable scale, time frames and end uses, we provide a comprehensive range of affordable, efficient and low-maintenanceÂ prefab buildings for sale and hire.

Whether you need a mini-store for a micro-business, a classroom for 20 to 40 schoolchildren, or a full mining or construction village for hundreds of workers, complete withÂ homes, offices and storage facilities, Ufudu is your smart choice.

OurÂ custom-made prefab buildings, comprisingÂ modular prefab panels, can be delivered to site, erected and then maintained and refurbished by Ufudu as required. These are ideal for urgent prefab applications, when a simple, reliable and affordable building solution is needed for:

sites offices
kitchens and canteens
mobile homes
classrooms
dormitories
ablution facilities
shows stands and other event facilities.

All prefab units can be supplied for short- and/or long-term requirements.

FAST AND EFFICIENT PREFAB SOLUTIONS FOR HOMES, OFFICES AND MORE

In many instances, we are able to design, configure, supply and install a completeÂ prefab accommodationÂ solution within a week or two. At all times our goal is to supply the customer’s prefab building needs as swiftly and efficiently as possible.

Once prefab building units are delivered on site, and all the required fittings have been installed and tested, we work diligently to ensure all services â€“ including water and electricity supply and plumbing â€“ are functioning fully to specification. Working in partnership with our reputable suppliers, we strive to ensure stringent quality assurance management at all times.

OPTION TO PURCHASE OR HIRE UFUDU'S PREFAB BUILDINGS

AvailableÂ for sale or short- and long-term hire, the respected Ufudu range of prefab buildings comes with all the required fixtures and fittings.

We also offer a wide range of customisation options to ensure that our customers have whatever features and facilities they need in aÂ prefab home, office or other mobile unit, where, when and how they need them.

TheÂ prefab buildingsÂ are for sale or hire, and come pre-assembled or inÂ prefabricated panels, which can be erected on site to the customer’s design requirements, on either a concrete slab foundation or a factory-manufactured, suspended floor.

PREFAB BUILDING SPECIFICATIONS

General construction

Units that are 6, 9 and 12 m in length:
Full-length, full-width structurally welded steel chassis with two 175 x 50 mm lipped-channel, longitudinal beams. Outriggers and cross-members are of 75 x 38 mm channel.

Units that are 15 and 18 m in length:
Full-length, full-width structurally welded steel chassis with two 250 x 75 mm lipped-channel, longitudinal beams. Outriggers and cross-members are of 75 x 38 mm channel.

The complete assembly is sandblasted and coated with self-etch red oxide primer. For added protection, the chassis is coated with a waterproof, malleable compound called Plaswax or similar which forms a tenacious wax-like surfacing.

Floor construction

Treated timber floorboards, 18mm thick, are glued and screwed to cross-members and covered in 2 mm industrial vinyl welded at joints. Carpet covering optional extra.

Roof and ceiling construction

The roof is a pitched roof construction consisting of the following:

Roof exterior is galvanised sheeting
Ceiling insulation is 40 mm thick high-density foam sandwiched between 0,5mm white chromadek sheeting
Ceiling finish is 0,5 mm white chromadek ceiling.

Sidewall construction

The standard exterior and interior finish is 0,5 mm Chromadek, which is a galvanised, prepainted (frost-white) finish. The perimeter and internal walls are fully insulated with 40 mm thick high-density foam. As an optional extra, chromadek sheeting with a decorative woodlike finish can be used for internal wall finishes.

Plumbing

Copper, stainless steel, or Polycop piping is used for water supply, and PVC fittings for sewerage and wastewater.

Sidewall construction

PARTITION WALLS

Thickness: 60 mm
Insulation: 50 mm mineral wool (120 kg/mÂ³)
Cladding (both sides): 0,5 mm galvanised steel sheet

WINDOWS

All window frames are aluminium, top-hung and fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

Electrics

Units are wired for connecting to 220 volt supply, in accordance with SABS 0142:1987, and are fitted with earth-leakage protection and distribution board. Lights, plugs, geyser and interior electrical fittings are installed as shown on the layout diagrams.

Transport and handling

It is extremely important that the following points are taken into consideration before delivery can be effected:

Site should be level and compacted. It should not slope more than 200 mm over the length and 100 mm over the width of the unit.
Site must be accessible for an abnormally large load. All trees and/or other obstacles that may be in the way must be removed beforehand to allow easy access.
Gates into property must be a minimum of 4 m wide, and truck must have a straight runup of at least 25 m, to allow bigger units (9 m and upwards) to be offloaded into position, and allow trucks to drive out from under unit after having lifted it.
Unit will be dropped onto trestles and levelled in order to allow doors to open freely. Final levelling must be done by client unless siting is done and charged for by Speedspace.
A site inspection prior to delivery can be arranged.
All equipment used for loading and off-loading of units is certified and load tested.

OPTIONAL EXTRAS

Exterior skirting
Carpets
Burglar bars
Flyscreens for both windows and doors

Curtains or blinds
Air conditioner
Three-phase electrics
Geysers (gas or electric)

Kitchen appliances (gas or electric)
Carports
Floor insulation
Other fittings/applications as per customer request.

UFUDUCABINS

Ufudu Cabins

Specialised Space Solutions

A RANGE OF LOW-COST UFUDUCABINS AVAILABLE FOR SALE OR HIRE

As a significant benefit, our collapsible and easily transportable Ufuducabins can save our customers and end-users up to 75% on freight charges. This means our flatpack system yields significant total cost savings, particularly when an affordable mobile space management solution, suitable for accommodation, is needed in a remote area.

Because freight costs into Africa are notably expensive and sometimes prohibitive, we transport collapsed units of Ufuducabins, which we erect on site to your requirements, instead of transporting space.

Whether you want to build a rural school, clinic or library, or a special construction, mining or exploration camp with homes and offices, a suite of mobile Ufuducabins, suitable for accommodation, complete with storage, sleeping, ablution, eating, laundry and recreational facilities, is available, for sale or hire, to meet your specific needs.

Our mobile Ufuducabins are robust, low maintenance and easy to install and customers have the option to purchase or hire, at attractive and competitive rates.

Assembly Flatpack Office Container/Cabin

Assembly Linking KIT of ARK Flatpack Office Container/Cabin

Assembly Partition Wall of Flatpack Office Container/Cabin

UFUDU CABIN MODELS

All mobile Ufuducabins, available for sale or hire, have a basic superstructure with interchangeable unit panels. Each superstructure comprises a floor, four corner posts and a roof.

The superstructure is available in four standard sizes: the 3m and 6m models, all of which are 2,44m wide and 2,79m high.

The modular superstructures in the flatpack system are designed to allow units to be joined and stacked for an unlimited range of home or office configurations.

With each Ufuducabin model, a predefined number of panels to complete the final cabin structure is installed. These panels, in turn, comprise different standard types: blind panels, door panels and window panels. These can be supplied and installed in various configurations to suit the customer’s requirements.

FLATPACK SYSTEM

Ufuducabins are easy to unpack, erect and commission with speed and accuracy, thanks to the flatpack system. All assembly can be done on site with standard tools. Each of our Ufuducabins can be erected on virtually any surface, because we provide adjustable base jacks inside our kits.

This flatpack system allows the end-user to join multiple units of mobile homes, offices or storage, even if the ground is uneven or not level. What’s more, should any Ufuducabin panel or other component be damaged, it is easy to replace because of the simple, modular designs we use.

UFUDUCABIN SPECIFICATIONS

DIMENSIONS

Height: external: 2,790 m/internal size: 2,500 m
Width: external: 2,435 m/internal size: 2,240 m
Length: external: 6,055 m/internal size: 5,860 m

FLOOR

Made from cold-rolled Q235A, 4 mm-thick profiled
steel with four ISO-dimensioned corner casts
12 x Q235A 3 mm-thick steel cross-members
Forklift pocket size: 90 m x 250 mm x 2 050 mm
Insulation: 100 mm mineral wool (40 kg/m³)
Subfloor: 0,5 mm thick galvanised steel sheet
18 mm cement fibre (Calcium Silicate) flooring

ROOF

Made from cold-rolled Q235A, 3 mm-thick welded steel profiles with four ISO-dimensioned corner casts
9 x Q235A 3 mm-thick steel cross-members
Insulation: 50 mm mineral wool (40 kg/mÂ³) + 50mm mineral wool (120 kg/mÂ³) galvanised steel sheeting internally and externally
Roof covering: 0,5 mm-thick galvanised steel sheeting
Ceiling: 0,5 mm galvanised steel sheet

PAINTING

Steel frame: 20-40 um primer, 40-50 um topcoat, Kingfisher blue
Wall panels: 45 um, RAL 9001 cream

WALL PANELS

Width: 1 145 mm
Thickness: 70 mm
Insulation: 60 mm mineral wool (120 kg/m³)
External cladding: 0,5 mm thick galvanised steel sheet
Internal cladding: 0,5 mm galvanised steel sheet

PARTITION WALLS

Thickness: 60 mm
Insulation: 50 mm mineral wool (120 kg/m³)
Cladding (both sides): 0,5 mm galvanised steel sheet

WINDOWS

Sliding aluminium profiled windows with dimension: 800 x 1 100 mm
Lockable aluminium roller shutter
Removable and sliding mosquito screen

EXTERIOR DOORS

Aluminium door with dimensions 825 mm x 2 040 mm
Insulation: 40 mm mineral wool (120 kg/m³)

UFUDU CABINS

MOBILE TRANSPACK CABINS ARE ROBUST, LOW MAINTENANCE AND EASY TO INSTALL

Whether you want to build a rural school, clinic or library, or a special construction, mining or exploration camp with homes and offices, a suite of mobile Transpack cabins, suitable for accommodation, complete with storage, sleeping, ablution, eating, laundry and recreational facilities, is available, for sale or hire, to meet your specific needs.

Our mobile Transpack cabins are robust, low maintenance and easy to install. Customers have the option of sale or hire, at attractive and competitive rates, any of the mobile Transpack cabins supplied and supported by Ufudu.

As a significant benefit, our collapsible and easily transportable Transpack cabins can save our customers and end-users up to 75% on freight charges. This means our flatpack system yields significant total cost savings, particularly when an affordable mobile space management solution, suitable for accommodation, is needed in a remote area.

Because freight costs into Africa are notably expensive and sometimes prohibitive, we transport collapsed units of Transpack cabins, which we erect on site to your requirements, instead of transporting space.

Assembly Flatpack Office Container/Cabin

Assembly Linking KIT of Flatpack Office Container/Cabin

Assembly Partition Wall of Flatpack Office Container/Cabin

OUR MOBILE TRANSPACK CABINS REPRESENT EASY-TO-INSTALL ACCOMMODATION SOLUTIONS

Once our cabins reach their destination, they are easy to unpack, erect and commission with speed and accuracy, thanks to the flatpack system. All assembly can be done on site with standard tools. Each of our Transpack cabins can be erected on virtually any surface, because we provide adjustable base jacks inside our kits. This flatpack system allows the end-user to join multiple units of mobile homes, offices or storage, even if the ground is uneven or not level. What’s more, should any Transpack cabin panel or other component be damaged, it is easy to replace because of the simple, modular designs we use.

INTRODUCING FOUR STANDARD MODELS OF TRANSPACK CABINS

All mobile Transpack cabins supplied and supported by Ufudu, available for sale or hire, have a basic superstructure with interchangeable unit panels. Each superstructure comprises a floor, four corner posts and a roof. The superstructure is available in four standard sizes:

3m length
4,8m length
6m length
9m length
All models are 2,44 m wide and 2,79 m high.

The modular superstructures in the flatpack system are designed to allow units to be joined and stacked for an unlimited range of home or office configurations.

With each Transpack cabin model, a predefined number of panels to complete the final cabin structure is installed. These panels, in turn, comprise different standard types: blind panels, door panels and window panels. These can be supplied and installed in various configurations to suit the customer’s requirements.

FLATPACK SPECIFICATIONS

DIMENSIONS

Height: external: 2,790 m/internal size: 2,500 m
Width: external: 2,435 m/internal size: 2,240 m
Length: external: 6,055 m/internal size: 5,860 m

FLOOR

Made from cold-rolled Q235A, 4 mm-thick profiled steel with four ISO-dimensioned corner casts
12 x Q235A 3 mm-thick steel cross-members
Forklift pocket size: 90 m x 250 mm x 2 050 mm
Insulation: 100 mm mineral wool (40 kg/mÂ³)
Subfloor: 0,5 mm thick galvanised steel sheet
18 mm cement fibre (Calcium Silicate) flooring

ROOF

Made from cold-rolled Q235A, 3 mm-thick welded steel profiles with four ISO-dimensioned corner casts
9 x Q235A 3 mm-thick steel cross-members
Insulation: 50 mm mineral wool (40 kg/mÂ³) + 50mm mineral wool (120 kg/mÂ³) galvanised steel sheeting internally and externally
Roof covering: 0,5 mm-thick galvanised steel sheeting
Ceiling: 0,5 mm galvanised steel sheet

PAINTING

Steel frame: 20-40 um primer, 40-50 um topcoat, Kingfisher blue
Wall panels: 45 um, RAL 9001 cream

WALL PANELS

Width: 1 145 mm
Thickness: 70 mm
Insulation: 60 mm mineral wool (120 kg/mÂ³)
External cladding: 0,5 mm thick galvanised steel sheet
Internal cladding: 0,5 mm galvanised steel sheet

PARTITION WALLS

Thickness: 60 mm
Insulation: 50 mm mineral wool (120 kg/mÂ³)
Cladding (both sides): 0,5 mm galvanised steel sheet

WINDOWS

Sliding aluminium profiled windows with dimension: 800 x 1 100 mm
Lockable aluminium roller shutter
Removable and sliding mosquito screen

EXTERIOR DOORS

Aluminium door with dimensions 825 mm x 2 040 mm
Insulation: 40 mm mineral wool (120 kg/mÂ³)

STEEL CONTAINERS

Steel Containers

STEEL CONTAINERS FOR SALE OR HIRE

AFFORDABLE, EASY TO USE, STEEL CONTAINERS FOR SALE OR HIRE

Ufudu offers a wide range of general purpose ISO dry-freight steel containers, as well as refrigerated steel containers for storage of perishable cargo, in several sizes and designs.

Ufudu has a reputation for its ability to supply and support a comprehensive range of affordable, mobile, easy-to-use and robust steel containers. These are used for standard and non-standard storage and shipping requirements, including refrigerated or freezer storage, as well as container conversions for a broad spectrum of mobile home, office and storage requirements. These steel containers are available for sale or hire, at attractive and competitive rates.

STEEL CONTAINER TECHNICAL SPECS

DRY FREIGHT CONTAINERS

20′ (6 m) with a maximum payload of 28,2 tons (metric)
40′ (12 m) standard height with a maximum payload of 28,8 tons
40′ (12 m) high cube, which offers an additional 9 mÂ³ of storage capacity

Although the exact dimensions of containers may vary slightly, the table below shows the general dimensions of general purpose ISO dry freight containers:

Size Internal Dimensions Door Opening Weight Volume Feet/inches Length Width Height Width Height Max Gross Tare Max Payload Cubic Capacity

REFRIGERATED FREIGHT CONTAINERS

Ufudu offers a range of refrigerated containers for perishable cargo in several sizes and designs:

20′ (6 m) with a maximum payload of 27,4 metric tons
40′ (12 m) high cube, which offers 64mÂ³ of storage capacity with a maximum payload of 29,6 tons.

Although the exact dimensions of containers may vary slightly, the table below shows the general dimensions of standard refrigerated containers:

Size Internal Dimensions Door Opening Weight Volume Feet/inches Length Width Height Width Height Max Gross Tare Max Payload Cubic Capacity

SPECIAL EQUIPMENT

In addition to the above main product lines, Ufudu is also able to source the following special equipment:

20' & 40' fixed corner flat racks
20' & 40' collapsible flat racks

40' flush fold flat racks
20' & 40' open tops (hard and soft top types)

Ufudu is also able to custom-design and manufacture non-standard steel containers at very competitive prices.

SPEEDPLAN

A COST-EFFECTIVE MODULAR PREFAB PANEL SYSTEM, IDEAL FOR UNITS INTENDED FOR LONG-TERM USE ON SITE

This prefab modular system is portable, and easily transported, even to remote areas, and is erected on site, on either a concrete slab foundation or a factory-manufactured, suspended floor.

The modular panel system is suitable for most types of accommodation, including: ablutions, dormitories, kitchens, schools, clinics, houses or modular site offices (including large on-site complexes), and can be customised to suit our clients’ requirements.

Frost-white walls and high-quality finishings complete the stylish look of the Speedplan modular panel system.

SPEEDOFFICE SPECIFICATIONS

GENERAL

The system has been designed to be erected on either a concrete raft foundation slab or factory manufactured suspended floor.
The width of the system increases in multiples of 1 150 mm up to a maximum o f 9 600 mm.
15 Degree roof pitch.
Floor-to-ceiling height 2 400 mm as standard. (2 700 mm as optional).
The 1 150 mm panel width reduces site erection time and allows for the factory fitting of components that would otherwise have to be fitted on site.
Up t o 100 m2 building can be containerised (six meter container) for transport purposes.
The layout of the building is planned and designed in consultation with the client and according to the requirements of the client.

EXTERIOR & INTERIOR WALL PANELS

Width: 1 150 mm
Insulation: 40 mm high-density foam
Cladding: 0,5 mm Chromadek finish both sides
Colour: Frost White

WINDOWS

All window frames are aluminium (sliding) fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

DOORS

External: Same as panel construction with three-lever locks
Internal: Hollow-core Sapele faced with two-lever locks

ROOF

Galvanised, long-span IBR sheets
Straight sheets – 0,5 mm full hard
Ridge – 0,4 5 mm girth ridging of similar material

CEILING

12,7 mm thick fissure-board, suspended ceiling.

CHROMADEK TRIMS

Exterior: Azure finish
Interior: Frost-white finish

FLOOR COVERING

2 mm Vinyl or 6 mm carpet plain-backed tiles as standard.

OPTIONAL EXTRAS

Exterior skirting
Vinyl Flooring
Burglar bars
Flyscreens for both windows and doors

Curtains or blinds
Air conditioner
Onduline or Harvey tiles for roof
Kitchen appliances (gas or electric)

Geysers (gas or electric)
Three-phase electrics
Carports
Floor insulation
Other fittings/applications as per customer request

SPEEDSPAN

PORTABLE MODULAR PREFAB UNITS ARE THE SOLUTION WHEN YOU NEED MORE ACCOMMODATION ON SITE

It is not easy to know in advance how much mobile on-site accommodation you will need. Speedspan mobile modular prefab units will fulfill your need to add to your on-site requirements.

These portable prefab units are modular, with additional sections easily deliverable to your site when needed.

Yet there’s nothing ‘ad hoc’ about the appearance of our expandable Speedspan modular prefab units – they come with pre-painted steel cladding, for a more stylish look on site.

SPEEDOFFICE SPECIFICATIONS

EXTERIOR WALLS

The standard exterior finish is 0,5 mm Chromadek, which is a galvanised, prepainted finish manufactured by Iscor. The outside walls are fully insulated giving total insulation – warm in winter, cool in summer.

INTERIOR WALLS

Decorative plywood is used as wall covering, and is also low maintenance.

ROOF

The pitched roof will be clad with Chromadek or galvanised IBR, maintenance free, and insulated with reflective foil.

FLOOR

The floor is of steel joists and treated timber floor construction supported on a treated steel chassis. On site, suspended timber floors rest on adjustable stands on strip foundations eliminating the need for concrete slabs.

FLOOR COVERING

Attractive carpeting is standard while hard-wearing, heavy-duty vinyl is an option for applications involving concentrated people traffic (e.g. classrooms).

FLOOR PLAN

Each unit is designed to accommodate partitions relative to client’s requirements. These partitions, which are placed in consultation with you, the client, are able to run laterally and longitudinally to make offices when the units are joined.

ELECTRICS

All units are wired for 220 volt, three-phase supply, complete with distribution board. Lights, plugs, geyser and interior electrical fittings are installed as shown on the layout diagrams. Air-conditioning apertures, wall plugs, telephone points and switches are placed in consultation with the client.

PLUMBING

Copper, stainless steel, or Polycop piping is used for water supply and PVC fittings for sewerage and wastewater.

WINDOWS

All window frames are anodised aluminium (sliding) fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

DESIGN

Each unit has been carefully designed in such a way that office complexes can be expanded at any stage by the addition of further sections. The system is designed for total flexibility whatever the need.

SITING

Factory-trained personnel site the Speedspan units and the slices are supported by adjustable metal stands, which are placed on foundations suited to the soil conditions.

TRANSPORTATION

Each slice can easily be transported on a flat-bed vehicle over rough roads and is offloaded by purposemade telescopic legs. Where access to the site is a problem, a crane may be used to offload the slices into position.

TECHNICAL SPECIFICATIONS

Description Model Model 9600 7200 Length (ext) 9 600 7 200 Length (int) 9 440 7 056 Width (ext) 3 400 3 400 Width (int) 2 400 2 400 Height (int) 3 450 3 450 Electrics Standard Standard Aluminium Windows Standard Standard Carpets Standard Standard Wall Insulation Standard Roof Insulation Standard Standard All dimensions given in mm) All dimensions given in mm) All dimensions given in mm)

OPTIONAL EXTRAS

Exterior skirting
Vinyl flooring
Burglar bars
Flyscreens for both windows and doors

Curtains or blinds
Air conditioner
Onduline or Harvey tiles for roof
Kitchen appliances (gas or electric)

Geysers (gas or electric)
Three-phase electrics
Carports
Floor insulation
Other fittings/applications as per customer request

SPEEDLOO

PREFAB PORTABLE TOILET/ABLUTION FACILITIES REPRESENT PRIVACY AND COMFORT ON SITE

Wherever workers congregate on site, hygienic toilet/ablution facilities are vital. Cleanliness, privacy and hot water are the keys to comfortable, civilised on-site living.

Our Speedloo mobile prefabricated ablution/toilet units are fully equipped, and vary in size from single toilets to complete bathroom/change – room/locker-room complexes.

On-site living now need not mean low standards in prefab bathrooms and toilets. The only problem with Speedloo portable prefab toilets is that your site workers may be too comfortable and linger too long!

SPEEDOFFICE SPECIFICATIONS

GENERAL CONSTRUCTION

Units that are 6, 9 and 12 m in length:
Full-length, full-width structurally welded steel chassis with two 175 x 50 mm lipped-channel, longitudinal beams. Outriggers and cross-members are of 75 x 38 mm channel.

Units that are 15 and 18 m in length:
Full-length, full-width structurally welded steel chassis with two 250 x 75 mm lipped-channel, longitudinal beams. Outriggers and cross-members are of 75 x 38 mm channel.

SIDEWALL CONSTRUCTION

PLUMBING

Copper, stainless steel, or Polycop piping is used for water supply, and PVC fittings for sewerage and wastewater.

ROOF & CEILING CONSTRUCTION

The roof is a pitched roof construction consisting of the following:

Roof exterior is galvanised sheeting
Ceiling insulation is 40 mm thick high-density foam sandwiched between 0,5 mm white chromadek sheeting
Ceiling finish is 0,5 mm white chromadek ceiling

WINDOWS

All window frames are aluminium, top-hung and fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

FLOOR CONSTRUCTION

Treated timber floorboards, 18 mm thick, are glued and screwed to cross-members and covered in 2 mm industrial vinyl welded at joints. Carpet covering optional extra.

ELECTRICS

TECHNICAL SPECIFICATIONS

Description Model Model Model Model Model Model S6241 6301 S96301 S12301 S15341 S18341 Length (ext) 5 820 5 820 9 300 11 620 15 100 17 420 Length (int) 5 740 5 740 9 220 11 540 15 020 17 340 Width (ext) 2 420 2 990 2 990 2 990 3 580 3 580 Width (int) 2 260 2 910 2 910 2 910 3 500 3 500 Height (int) 2 400 2 400 2 400 2 400 2 400 2 400 Electrics Standard Standard Standard Standard Standard Standard Aluminium Windows Standard Standard Standard Standard Standard Standard Vinyl Floor Standard Standard Standard Standard Standard Standard Wall Insulation Standard Standard Standard Standard Standard Standard Roof Insulation Standard Standard Standard Standard Standard Standard All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm)

TRANSPORT & HANDLING

It is extremely important that the following points are taken into consideration before delivery can be effected:

Site should be level and compacted. It should not slope more than 200 mm over the length and 100 mm over the width of the unit.
Site must be accessible for an abnormally large load. All trees and/or other obstacles that may be in the way must be removed beforehand to allow easy access.
Gates into property must be a minimum of 4 m wide, and truck must have a straight run-up of at least 25 m, to allow bigger units (9 m and upwards) to be offloaded into position, and allow trucks to drive out from under unit after having lifted it.
Unit will be dropped onto trestles and levelled in order to allow doors to open freely. Final levelling must be done by client unless siting is done and charged for by Ufudu.
A site inspection prior to delivery can be arranged.
All equipment used for loading and off-loading of units is certified and load tested.

OPTIONAL EXTRAS

Exterior skirting
Carpets
Burglar bars
Flyscreens for both windows and doors

Curtains or blinds
Air conditioner
Three-phase electrics
Kitchen appliances (gas or electric)

Geysers (gas or electric)
Carports
Floor insulation
Other fittings/applications as per customer request

SPEEDCOOK

PREFAB MOBILE SITE KITCHENS CONFIGURED AND EQUIPPED TO YOUR SPECIFICATIONS

Speedcook prefab mobile kitchens/cafeterias are fully equipped with all appliances and fittings required for the hygienic preparation of delicious meals on site.

These attractive, prefab mobile kitchen units are easy to use, clean and keep tidy, no matter how remote your site happens to be.

Our Speedcook portable prefab kitchen units are configured and equipped according your site requirements. If on-site meals are still unappealing, blame the cook – not the Speedcook mobile kitchen!

SPEEDOFFICE SPECIFICATIONS

GENERAL CONSTRUCTION

SIDEWALL CONSTRUCTION

The standard exterior and interior finish is 0,5 mm Chromadek, which is a galvanised, prepainted (frostwhite) finish. The perimeter and internal walls are fully insulated with 40 mm thick high-density foam. As an optional extra, chromadek sheeting with a decorative woodlike finish can be used for internal wall finishes.

PLUMBING

Copper, stainless steel, or Polycop piping is used for water supply, and PVC fittings for sewerage and wastewater.

ROOF & CEILING CONSTRUCTION

The roof is a pitched roof construction consisting of the following:

Roof exterior is galvanised sheeting
Ceiling insulation is 40 mm thick high-density foam sandwiched between 0,5 mm white chromadek sheeting
Ceiling finish is 0,5 mm white chromadek ceiling

WINDOWS

All window frames are aluminium, top-hung and fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

FLOOR CONSTRUCTION

Treated timber floorboards, 18 mm thick, are glued and screwed to cross-members and covered in 2 mm industrial vinyl welded at joints. Carpet covering optional extra.

ELECTRICS

TECHNICAL SPECIFICATIONS

TRANSPORT & HANDLING

It is extremely important that the following points are taken into consideration before delivery can be effected:

Site should be level and compacted. It should not slope more than 200 mm over the length and 100 mm over the width of the unit.
Site must be accessible for an abnormally large load. All trees and/or other obstacles that may be in the way must be removed beforehand to allow easy access.
Gates into property must be a minimum of 4 m wide, and truck must have a straight runup of at least 25 m, to allow bigger units (9 m and upwards) to be offloaded into position, and allow trucks to drive out from under unit after having lifted it.
Unit will be dropped onto trestles and levelled in order to allow doors to open freely. Final levelling must be done by client unless siting is done and charged for by Ufudu.
A site inspection prior to delivery can be arranged.
All equipment used for loading and off-loading of units is certified and load tested.

OPTIONAL EXTRAS

Exterior skirting
Carpets
Burglar bars
Flyscreens for both windows and doors

Curtains or blinds
Air conditioner
Three-phase electrics
Kitchen appliances (gas or electric)

Geysers (gas or electric)
Carports
Floor insulation
Other fittings/applications as per customer request

SPEEDSLEEP

OUR PREFAB MOBILE DORMITORY UNITS OFFER A HIGH LEVEL OF SLEEPING COMFORT ON SITE

Our prefab Speedsleep mobile dormitory units offer you a choice of single, double or multiple sleeping accommodation on site. These portable units are well designed, and are spacious, well ventilated and fully insulated.

If you thought sleeping accommodation on industrial and construction sites were about camping, think again. These prefab mobile bedrooms are in a different class. Speedsleep mobile dormitories will provide you with peaceful, undisturbed sleep on site – so vital for optimum work performance!

SPEEDOFFICE SPECIFICATIONS

GENERAL CONSTRUCTION

SIDEWALL CONSTRUCTION

PLUMBING

Copper, stainless steel, or Polycop piping is used for water supply, and PVC fittings for sewerage and wastewater.

ROOF & CEILING CONSTRUCTION

The roof is a pitched roof construction consisting of the following:

Roof exterior is galvanised sheeting
Ceiling insulation is 40 mm thick high-density foam sandwiched between 0,5 mm white chromadek sheeting
Ceiling finish is 0,5 mm white chromadek ceiling

WINDOWS

All window frames are aluminium, top-hung and fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

FLOOR CONSTRUCTION

Treated timber floorboards, 18 mm thick, are glued and screwed to cross-members and covered in 2 mm industrial vinyl welded at joints. Carpet covering optional extra.

ELECTRICS

TECHNICAL SPECIFICATIONS

Description Model Model Model Model Model Model S6241 6301 S96301 S12301 S15341 S18341 Length (ext) 5 820 5 820 9 300 11 620 15 100 17 420 Length (int) 5 740 5 740 9 220 11 540 15 020 17 340 Width (ext) 2 420 2 990 2 990 2 990 3 580 3 580 Width (int) 2 260 2 910 2 910 2 910 3 500 3 500 Height (int) 2 400 2 400 2 400 2 400 2 400 2 400 Electrics Standard Standard Standard Standard Standard Aluminium Windows Standard Standard Standard Standard Standard Standard Vinyl Floor Standard Standard Standard Standard Standard Standard Wall Insulation Standard Standard Standard Standard Standard Standard Roof Insulation Standard Standard Standard Standard Standard Standard All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm) All dimensions given in mm)

TRANSPORT & HANDLING

It is extremely important that the following points are taken into consideration before delivery can be effected:

Site should be level and compacted. It should not slope more than 200 mm over the length and 100 mm over the width of the unit.
Site must be accessible for an abnormally large load. All trees and/or other obstacles that may be in the way must be removed beforehand to allow easy access.
Gates into property must be a minimum of 4 m wide, and truck must have a straight runup of at least 25 m, to allow bigger units (9 m and upwards) to be offloaded into position, and allow trucks to drive out from under unit after having lifted it.
Unit will be dropped onto trestles and levelled in order to allow doors to open freely. Final levelling must be done by client unless siting is done and charged for by Ufudu.
A site inspection prior to delivery can be arranged.
All equipment used for loading and off-loading of units is certified and load tested.

OPTIONAL EXTRAS

Exterior skirting
Carpets
Burglar bars
Flyscreens for both windows and doors

Curtains or blinds
Air conditioner
Three-phase electrics
Kitchen appliances (gas or electric)

Geysers (gas or electric)
Carports
Floor insulation
Other fittings/applications as per customer request

SPEEDRES

OUR SPEEDRES PREFAB MOBILE RESIDENTIAL ACCOMODATION (PARKHOME) OFFERS ALL THE USUAL HOUSE COMFORTS ON SITE, NO MATTER WHERE YOU ARE

Ufudu offers you Speedres, comfortable, welcoming ‘home from home’ prefabricated mobile residential accommodation (Parkhomes), designed for singles or families on site. These temporary mobile houses provide a high standard of finishings and fittings, in no way inferior to those of many more permanent houses.

These fully-insulated, portable, prefab residential accommodation units (Parkhomes) include all house comforts, uncramped living space on site, and appliances to order.

Once the occupants start planting flowerbeds outside these mobile Parkhomes, you’ll know they feel at home on site!

SPEEDOFFICE SPECIFICATIONS

GENERAL CONSTRUCTION

SIDEWALL CONSTRUCTION

The standard exterior and interior finish is 0,5 mm Chromadek, which is a galvanised, prepainted (frost-white) finish. The perimeter and internal walls are fully insulated with 40 mm thick high-density foam. As an optional extra, chromadek sheeting with a decorative wood-like finish can be used for internal wall finishes.

PLUMBING

Copper, stainless steel, or Polycop piping is used for water supply, and PVC fittings for sewerage and wastewater.

ROOF & CEILING CONSTRUCTION

The roof is a pitched roof construction consisting of the following:

Roof exterior is galvanised sheeting
Ceiling insulation is 40 mm thick high-density foam sandwiched between 0,5 mm white chromadek sheeting
Ceiling finish is 0,5 mm white chromadek ceiling

WINDOWS

All window frames are aluminium, top-hung and fitted with 4 mm thick glass. The area of the windows is equal to or greater than 10% of the gross floor area of each habitable room.

FLOOR CONSTRUCTION

Treated timber floorboards, 18 mm thick, are glued and screwed to cross-members and covered in 2 mm industrial vinyl welded at joints. Carpet covering optional extra.

ELECTRICS

TECHNICAL SPECIFICATIONS

TRANSPORT & HANDLING

It is extremely important that the following points are taken into consideration before delivery can be effected:

Site should be level and compacted. It should not slope more than 200 mm over the length and 100 mm over the width of the unit.
Site must be accessible for an abnormally large load. All trees and/or other obstacles that may be in the way must be removed beforehand to allow easy access.
Gates into property must be a minimum of 4 m wide, and truck must have a straight run-up of at least 25 m, to allow bigger units (9 m and upwards) to be offloaded into position, and allow trucks to drive out from under unit after having lifted it.
Unit will be dropped onto trestles and levelled in order to allow doors to open freely. Final levelling must be done by client unless siting is done and charged for by Ufudu.
A site inspection prior to delivery can be arranged.
All equipment used for loading and off-loading of units is certified and load tested.